RO Water-Treating Unit , APM RS-250 ~ RS-800

APM RS-250 ~ RS-800

Operation Pressure : 150 -220 PSI
Rejection : >97% (Organic, colloids, bacteria, and pyrogen are above 99.9% rejected.)
Recovery Rate: 50% ~ 75%

Model#	Flow Rates (GPD)	R.O Modules (Model x Numers)	R.O Pump / Voltage	Pre - Filter	Dimensions (cm) & Weight (kg)
RS - 250 RS - 500 SR - 800	250 500 800	2521*1 2521*2 4021*1	1/3HP,110V/220V 1/3HP,110V/220V 1/2HP,110V/220V	5µm, 20" * 1 1µm, 20" * 1	73*40*113*56 73*40*113*58 73*40*113*60

Feedwater Conditions
Inlet Pressure ------------- > 1.5 kg/cm2
Chlorine -------------- < 0.1 ppm
Total Hardness ----------- <10 ppm
Turbidity ------------- < 2 NTU
Fe ----------------------------- < 0.1 ppm
SDI -------------------- < 4

a. Automatically operates and PLC control device.
b. Automatic flush device.
c. Low-pressure protection switch.
d. Product Hi-level control.
e. Over - heat protection device for pump.
f. Concentrate recycle-flow regulator.
g. Digital feed/ product water quality meter.
h. Operating pressure set-up device.
i. Automatic power shut-off device if pre-treatment system is in regeneration process.
j. Chemical cleaning system.
k. All # SUS 304 made skids except the RS-series.
l. Includes one standard Hi-pressure R.O Pump; optional two parallel Hi-pressure R.O Pumps are also available.