Commercial RO System , APM-SA-1500 ~ SA-9000

APM-SA-1500 ~ SA-9000

Operation Pressure : 150 -220 PSI
Rejection : >97% (Organic, colloids, bacteria, and pyrogen are above 99.9% rejected.)
Recovery Rate: 50% ~ 75%

Model#	Flow Rates (GPD)	R.O Modules (Model x Numers)	R.O Pump / Voltage	Pre - Filter	Dimensions (cm) & Weight (kg)
SA - 1500 SA - 3000 SA - 4500 SA - 6000 SA - 7500 SA - 9000	1500 3000 4500 6000 7500 9000	4040*1 4040*2 4040*3 4040*4 4040*5 4040*6	1HP,110V/220V 3HP,220V/380V 3HP,220V/380V 4HP,220V/380V 5.5HP,220V/380V 5.5HP,220V/380V	5µm, 20" * 1 5µm, 20" * 1 5µm, 20" * 1 5µm, 20" * 2 5µm, 20" * 2 5µm, 20" * 2	90*70*154*83 90*70*154*150 90*70*154*168 90*70*154*188 90*70*154*210 90*70*154*232

Feedwater Conditions
Inlet Pressure ------------- > 1.5 kg/cm2
Chlorine -------------- < 0.1 ppm
Total Hardness ----------- <10 ppm
Turbidity ------------- < 2 NTU
Fe ----------------------------- < 0.1 ppm
SDI -------------------- < 4

a. Automatically operates and PLC control device.
b. Automatic flush device.
c. Low-pressure protection switch.
d. Product Hi-level control.
e. Over - heat protection device for pump.
f. Concentrate recycle-flow regulator.
g. Digital feed/ product water quality meter.
h. Operating pressure set-up device.
i. Automatic power shut-off device if pre-treatment system is in regeneration process.
j. Chemical cleaning system.
k. All # SUS 304 made skids except the RS-series.
l. Includes one standard Hi-pressure R.O Pump; optional two parallel Hi-pressure R.O Pumps are also available.